Microphone Accessories
| 58 Item(s) | Show per page |
| View as: List Grid |
Sort by
|
Electret Mic Insert with Fly Leads
NZ$2.71
As low as:
NZ$2.70
Electret mic insert for replacing broken units or building into audio equipment. Specifications Polar pattern: Omni-directional Current drain: 0.8mA max.... Learn More
4 Conductor 2 Shield Microphone Curly Cord
NZ$12.31
4 core shielded lead extends to ≈1.5m fully stretched. Has 2 shielded leads for the mic insert and two leads for PTT function. SKU:... Learn More
12mm Lapel Microphone Windsock
NZ$2.29
Used to negate breath noise and eliminate wind or breath "pop". This windsock is designed specifically to suit our lapel microphone and is sold as both a spare part and as a generic unit.... Learn More
Windsock 8mm Suit C 8911
NZ$2.29
Used to negate breath noise and eliminate wind or breath "pop". This windsock is designed specifically to suit C8911 lapel microphone and is sold as both a spare part and as a generic unit. ... Learn More
20mm Pencil Microphone Windsock
NZ$2.29
Used to negate breath noise and eliminate wind or breath 'pop' SKU:... Learn More
27mm Medium Microphone Windsock
NZ$2.29
Used to negate breath noise and eliminate wind or breath 'pop' SKU:... Learn More
40mm Ball Microphone Windsock
NZ$3.06
Used to negate breath noise and eliminate wind or breath 'pop' SKU:... Learn More
10mm Pencil Microphone Windsock
NZ$2.29
Used to negate breath noise and eliminate wind or breath 'pop' SKU:... Learn More
Windsock To Suit C0375
NZ$2.29
Used to negate breath noise and eliminate wind or breath “pop”. Size refers to inside diameter of windsock opening.7mm SKU:... Learn More
Windsock To Suit C0361
NZ$11.73
Used to negate breath noise and eliminate wind or breath 'pop' SKU:... Learn More
3 Microphone Holder Crossbar
NZ$14.79
Adapts a single mic stand head to three mounting points. eg. May be used to mount three microphones on a single mic stand. Standard 5/8" thread. Useful for recording in stereo. SKU:... Learn More
Microphone Holder
NZ$7.13
Standard type mic holder, uses 5/8" thread to enable direct fitting to most mic stands and goosenecks. SKU:... Learn More
Mic Holder 22mm Flexible.
NZ$7.13
Designed to suit narrow bodied hard wired mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a... Learn More
-Holder--62-C0404-20.gif "Large Microphone ( Radio Microphone ) Holder")
Large Microphone ( Radio Microphone ) Holder
NZ$8.61
Designed to suit large radio mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of... Learn More
Spring Loaded Microphone Holder
NZ$7.36
Spring loaded mic holder, uses 5/8" thread to enable direct fitting to most mic stands and goosenecks. SKU:... Learn More
330mm Natural Gooseneck Microphone Extension
NZ$12.96
Microphone gooseneck incorporating 5/8” thread male to female. Matching bench mount bases C 0420/21. 300mm Chrome. SKU:... Learn More
300mm Black Gooseneck Microphone Extension
NZ$12.96
Microphone gooseneck incorporating 5/8” thread male to female. Matching bench mount bases C 0420/21. 300mm Black. SKU:... Learn More
450mm Natural Gooseneck Microphone Extension
NZ$15.49
Microphone gooseneck incorporating 5/8” thread male to female. Matching bench mount bases C 0420/21. 450mm Chrome. SKU:... Learn More
450mm Black Gooseneck Microphone Extension
NZ$15.49
Microphone gooseneck incorporating 5/8” thread male to female. Matching bench mount bases C 0420/21. 450mm Black. SKU:... Learn More
XLR Male to XLR Female Gooseneck
NZ$34.16
Microphone gooseneck incorporating XLR male to XLR female and suits C 0430 base. 400mm Black. SKU:... Learn More
Natural Gooseneck Microphone Base
NZ$4.24
As low as:
NZ$3.89
Has a 5/8" male thread one end and 5/8" female thread other end. Screws included. Chrome base SKU:... Learn More
Black Gooseneck Microphone Base
NZ$4.24
As low as:
NZ$3.91
Has a 5/8" male thread one end and 5/8" female thread other end. Screws included. Black base SKU:... Learn More
Natural desk Mount XLR Microphone Socket
NZ$12.31
Incorporates a 3 pin XLR socket for mounting gooseneck microphones. Screws directly to a desk or bench top making a neat and simple installation. Chrome. SKU:... Learn More
Black desk Mount XLR Microphone Socket
NZ$12.31
Incorporates a 3 pin XLR socket for mounting gooseneck microphones. Screws directly to a desk or bench top making a neat and simple installation. Black. SKU:... Learn More
3 pin Horizontal Steel Microphone Plate
NZ$17.61
3 Pin Horizontal Mount Stainless Steel Plates with 1 x XLR skt SKU:... Learn More
3 pin Horizontal Microphone Plate
NZ$32.40
3pin XLR microphone connector mounted horizontally on a HPM wall plate. “One-Shot” version with screw terminal connections for quick and easy connection on site. SKU:... Learn More
3 pin Horizontal Microphone Plate Clipsal
NZ$32.40
3pin XLR microphone connector mounted horizontally on a HPM wall plate. “One-Shot” version with screw terminal connections for quick and easy connection on site. SKU:... Learn More
3 pin X 2 Horizontal Steel Microphone Plate
NZ$19.97
3 Pin Horizontal Mount Stainless Steel Plates with 2 x XLR skts SKU:... Learn More
5 pin Vertical Microphone Plate
NZ$37.29
As low as:
NZ$35.64
5 Pin Vertical Mount Standard Electrical Plate with 1 x XLR skt SKU:... Learn More
5 pin Horizontal Steel Microphone Plate
NZ$34.76
As low as:
NZ$31.56
5 Pin Horizontal Mount Stainless Steel Plates with 1 x XLR skt SKU:... Learn More
5 pin Horizontal Microphone Plate
NZ$34.76
5pin XLR microphone connector mounted horizontally on a HPM wall plate. “One-Shot” versions with screw terminal connections for quick and easy connection on site. SKU:... Learn More
5 pin Horizontal Microphone Plate Clipsal
NZ$34.76
5pin XLR microphone connector mounted horizontally on a HPM wall plate. “One-Shot” versions with screw terminal connections for quick and easy connection on site. SKU:... Learn More
5 pin X 2 Horizontal Steel Microphone Plate
NZ$37.12
As low as:
NZ$34.80
5 Pin Horizontal Mount Stainless Steel Plates with 2 x XLR skts SKU:... Learn More
Radio Microphone Soft Carry Case
NZ$11.78
Protect your valuable microphone and accessories with this soft vinyl carry case. SKU:... Learn More
3 Pin XLR Heavy Duty Lectern Microphone Base
NZ$58.85
Ideal for mounting gooseneck microphones. Includes an on/off switch. The heavy die cast base includes a female XLR socket for the microphone and a male outlet for connection to the amplifier.... Learn More
3 Pin XLR Microphone Shock Mount Base
NZ$40.24
The elegant modern design of this base makes it ideal for use in conference rooms, board rooms, podiums, pulpits, etc. The rubber suspension of the XLR socket minimises shock or mechanical noise... Learn More
Gooseneck Shock Mount Base
NZ$35.29
Flush mount friction fit gooseneck base. Suitable for C 0410-C 0413 goosenecks. SKU:... Learn More
Microphone Mini Tripod Stand
NZ$9.84
Mic stand has fold in legs and stands 86mm high when extended. With standard 5/8" thread. SKU:... Learn More
Mic Stand Tripod W/Holder
NZ$22.33
Robust mic stand with fold-up legs and adjustable centre stem. With standard 5/8" thread and mic holder. SKU:... Learn More
Microphone Desk Stand
NZ$35.29
Diecast base, telescopic height adjustment from 220mm to 380mm. Weight 1.4kg. 5/8" mic holder threaded adaptor included. SKU:... Learn More
Microphone Floor Stand With Boom
NZ$81.30
Sturdy telescopic stem with friction grip adjustment and foldup legs. Includes screw adaptor attachment (5/8") for microphone holder etc. Height adjusts from 96 to 160cm with 70cm adjustable boom. ... Learn More
0.5m 3 Pin Male XLR to Female XLR Microphone Lead
NZ$12.90
As low as:
NZ$11.37
XLR Male / XLR Fem. 0.5M SKU:... Learn More
1m 3 Pin Male XLR to Female XLR Microphone Lead
NZ$14.07
As low as:
NZ$13.17
XLR Male / XLR Fem. 1m SKU:... Learn More
3m 3 Pin Male XLR to Female XLR Microphone Lead
NZ$16.43
As low as:
NZ$14.75
XLR Male / XLR Fem. 10m SKU:... Learn More
5m 3 Pin Female XLR to 6.35mm Jack Microphone Lead
NZ$16.43
As low as:
NZ$16.38
XLR Fem. / 6.35mm Male 5m SKU:... Learn More
10m 3 Pin Female XLR to 6.35mm Jack Microphone Lead
NZ$21.15
XLR Fem. / 6.35mm Male - 10meters SKU:... Learn More
5m 3 Pin Male XLR to Female XLR Microphone Lead
NZ$18.79
As low as:
NZ$16.41
XLR Male / XLR Fem. 5m SKU:... Learn More
10m 3 Pin Male XLR to Female XLR Microphone Lead
NZ$23.51
XLR Male / XLR Fem. 10m SKU:... Learn More
Omni-Directional Electret Microphone Insert
NZ$2.71
Polar Pattern: Omni-directional Current Drain: 0.8mA max. Impedance: 1k Ohm, ±30% Sensitivity: -55dBm ±3dB Frequency Response: 20Hz-10kHz Dimensions: 10Ø x 10mm Electret mic... Learn More
Omni-directional 61db Electret Microphone Insert
NZ$2.71
Specifications Polar Pattern: Omni-directional Current Drain: 0.8mA max. Impedance: 1k Ohm, ±30% Sensitivity: -61dBm ±3dB Frequency Response: 20Hz-10kHz Dimensions: 10Ø x 10mm ... Learn More
NEW! UHF Receiver 16 Channel With Handheld Mic
NZ$316.94
The perfect entry level system for clubs, restaurants, function centres, wedding ceremonies etc. It produces a clear, crisp vocal reproduction, whilst allowing freedom of movement. Supplied as a... Learn More
Redback® Beltpack Transmitter
NZ$234.46
Beltpack transmitter ideal for use with the Redback® 700 channel receiver unit (C 8890A). Features • Compact & lightweight • Fitted with 3 pin mini XLR socket • On / Off /... Learn More
| 58 Item(s) | Show per page |
| View as: List Grid |
Sort by
|
