You have no items in your shopping cart.
16 Channel UHF Beltpack Transmitter Description
Fitted with a 3 pin mini XLR microphone socket for connecting the desired microphone. The On/Off/Mute switch is located on the top of the unit. A gain control is provided and may be adjusted by the included tool. Powered by a 9V battery. For prolonged reliable use, we recommend only quality long life alkaline batteries be used. Typical use would be around 6-8 hours.
| System Features |
| Operates on UHF frequency band range 790-806MHz. PLL (Phase Locked Loop) synthesized wireless microphone system with 16 selectable frequencies making it easy to choose interference free channels. Excellent reception system ensures super high sensitivity. Units are supplied with SMT assembled PCB modules ensuring high reliability, and easy serviceability. High signal-noise ratio, high sensitivity & wide dynamic range. |
| Transmitter Specifications |
| Carrier Freq. Range (UHF band): 790~806MHz RF Power Output: 10mW. Spurious Emission (below carrier freq.): >60dB Frequency Stability (with PLL control): Within ±0.005% AF Response (+/-3dB): 50Hz to 15KHz Maximum Deviation (with limit compressor): ± 48KHz Signal to Noise Ratio (A-Weighted): 94dB Microphone Capsule: Condenser Operating voltage: 1.5V x 2 Current consumption: 65mA LED Indicator: Power On-Standby-Off, Low battery
|
SKU: C8875C
Our Guarantee
Additional Information
| SKU | 62-C8875C |
| Brand | N/A |
Write Your Own Review
You're reviewing: 16 Channel UHF Beltpack Transmitter
Categories | Microphones - Wireless
| Volt Electronics - Buy Electronics
